Category5.TV Community Forum
XU4 resize issue - Printable Version

+- Category5.TV Community Forum (
+-- Forum: NEMS - Nagios Enterprise Monitoring Server (
+--- Forum: Bug Reports (
+--- Thread: XU4 resize issue (/thread-353.html)

XU4 resize issue - JonBackhaus - 10-17-2018

XU4 SD resize issue; see this post:

Build info: 32 GB SD Card + 32 GB eMMC

RE: XU4 resize issue - Robbie Ferguson - 10-17-2018

Thanks for reporting the issue JonBackhaus. I will build a new image with the fix within the next week or two.

RE: XU4 resize issue - Robbie Ferguson - 10-24-2018

Hi JonBackhaus,
I was about to release the 3rd build, but then I was able to replicate the problem.
It looks like this occurs when you have BOTH an emmc card and a SD card connected simultaneously.
Does this match your setup?
If yes, why do you have both connected?
I've held Build 3 to give us a chance to discuss and I will create a fix.

RE: XU4 resize issue - Robbie Ferguson - 10-24-2018

Update: I have written a patch to allow the resize script to work even if you have both an emmc and a SD card installed.

I'm still curious though why you have this.

I will create build 3 with the new patch within the next 24 hours or so.

RE: XU4 resize issue - JonBackhaus - 10-24-2018

Yes — it does. My original intent was to install to the eMMC. When I saw that was not supported, I figured I would install to the SD and then move some logs, etc. on to the eMMC.

RE: XU4 resize issue - Robbie Ferguson - 10-24-2018

Fair enough :)
I simply had never thought someone might install both a SD card and a eMMC card. Just didn't cross my mind, that's all. So I didn't account for it.
So, I've written the patch and will create the new image. Watch for Build 3. You'll need to re-image to fix your NEMS server, so just run a Migrator backup so you can import after you re-flash.

RE: XU4 resize issue - Robbie Ferguson - 10-28-2018

This issue (caused by having an eMMC card AND SD card installed, so system didn't know what to resize) is resolved. If you are affected by this issue, please re-flash 1.4.1 Build 3 for ODROID XU3/XU4/HC1/HC2 (or higher).