[andyk1]

Hi Robbie,

I burned Plexpi 1.3 using Etcher onto micro SD card which went fine. I put the micro SD card into my Rasberry Pi 3 B. I connected to Cat 5 into my router and powered on.

I am now on my Windows 10 Laptop and attempting to access the Plexpi by typing in the IP address that my router lists as plexpi 192.168.0.101

If I type 192.168.0.101 into my browser, I get an Unable to Connect message.

If I type 192.168.0.101:32400 into my browser, I get a white screen and the Plex Icon in the address bar, but nothing else.

If I use CMD line to ping 192.168.0.101 I get good reply, no losses, so it's there, I'm just not able to see anything in my browser.

Using Firefox 59.0.2

Any ideas?

Andy

[Robbie Ferguson]

Hi Andy,
The correct URL in your case is http://192.168.0.101:32400/web

I'm working on a better interface which will come out probably with 1.4.

All the best,
Robbie

[Shep]

If you are having the same issue as me (which it sounds like you are) then your plexmediaserver service is not running.  And I have not been able to figure out why.  I ran some suggested commands, but never heard back as to the solution.