Hi all I am very new to using NEMS so please forgive me if I come off as noob or uneducated im some of my phrasing here.
So I have set up a raspberry pi 3 with NEMS after some trial and error with installing NAGIOS older iteration of 3.4 or so I remember.
I am aware that this may seem redundant as most of this info is already displayed through the web interface but the nature of what i have planned for my project what follows would be necessary
Im looking to know is it possible to attach peripheral devices such as a small LCD screen and a temperature probe to measure the external temperature and display it on a standard LCD screen for raspberry pi's.
I would greatly appreciate any feedback on this and if there are already solutions to this problem would love to be pointed in the right directions as so far my searching has yielded few results.
Below is what I have intended to attach to the device
https://www.amazon.co.uk/DS18B20-Waterpr...67&sr=8-10
https://www.amazon.co.uk/keyestudio-Disp...way&sr=8-8
Thanks!
So I have set up a raspberry pi 3 with NEMS after some trial and error with installing NAGIOS older iteration of 3.4 or so I remember.
I am aware that this may seem redundant as most of this info is already displayed through the web interface but the nature of what i have planned for my project what follows would be necessary
Im looking to know is it possible to attach peripheral devices such as a small LCD screen and a temperature probe to measure the external temperature and display it on a standard LCD screen for raspberry pi's.
I would greatly appreciate any feedback on this and if there are already solutions to this problem would love to be pointed in the right directions as so far my searching has yielded few results.
Below is what I have intended to attach to the device
https://www.amazon.co.uk/DS18B20-Waterpr...67&sr=8-10
https://www.amazon.co.uk/keyestudio-Disp...way&sr=8-8
Thanks!